Solved

what uses a sony qd6250 tape?

Posted on 2014-04-18
2
459 Views
Last Modified: 2014-04-18
I need to know what tape drive reads a Sony QD6250 tape.  Yes, I know it is old technology.
0
Comment
Question by:penguins_rule
2 Comments
 
LVL 23

Accepted Solution

by:
tailoreddigital earned 500 total points
ID: 40009209
One of these,
http://www.sunstarco.com/tape%20drives/ibm/IBM%207207%20%C2%BC%20Inch%20%20QIC%20-%20External%20Tape%20Drive.htm

Your tape is QIC150 format, this IBM7207 model 122 reads and writes it.
0
 
LVL 1

Author Comment

by:penguins_rule
ID: 40009330
i found the Tandberg 3660 can be used. However, it has brittle plastic parts which may make it unusable nowadays. The Tandberg 4120 is backwards compatible with the tape. This information was provided by ReMax Electronics.
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This article aims to explain the working of CircularLogArchiver. This tool was designed to solve the buildup of log file in cases where systems do not support circular logging or where circular logging is not enabled
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question