Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

ROUTE.EXE Windows 2012 Server Not Working

Posted on 2014-04-22
3
Medium Priority
?
691 Views
Last Modified: 2014-04-22
Hello, I need to route all traffic to this IP via the private interface:

190.148.68.22

The same way all traffic to 10.x.x.x is getting routed... here is the routing table:

===========================================================================
Interface List
 22...00 25 90 5a 01 ea ......Microsoft Network Adapter Multiplexor Driver #2
 21...00 25 90 5a 01 eb ......Microsoft Network Adapter Multiplexor Driver
  1...........................Software Loopback Interface 1
 19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
 23...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
 25...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0  184.172.1.137  184.172.1.142    266
         10.0.0.0        255.0.0.0     10.106.51.65     10.106.51.68     11
     10.106.51.64  255.255.255.192         On-link      10.106.51.68    266
     10.106.51.68  255.255.255.255         On-link      10.106.51.68    266
    10.106.51.127  255.255.255.255         On-link      10.106.51.68    266
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  184.172.1.136  255.255.255.248         On-link   184.172.1.142    266
  184.172.1.142  255.255.255.255         On-link   184.172.1.142    266
  184.172.1.143  255.255.255.255         On-link   184.172.1.142    266
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link      10.106.51.68    266
        224.0.0.0        240.0.0.0         On-link   184.172.1.142    266
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link      10.106.51.68    266
  255.255.255.255  255.255.255.255         On-link   184.172.106.142    266
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
         10.0.0.0        255.0.0.0     10.106.51.65       1
          0.0.0.0          0.0.0.0  184.172.1.137  Default
===========================================================================

IPv6 Route Table
===========================================================================
Active Routes:
 If Metric Network Destination      Gateway
  1    306 ::1/128                  On-link
 21    266 2607:f0d0:1901:50::/64   On-link
 21    266 2607:f0d0:1901:50:9578:400d:2aa:5855/128
                                    On-link
 22    266 fe80::/64                On-link
 21    266 fe80::/64                On-link
 22    266 fe80::9dc:2a9e:43ad:dd20/128
                                    On-link
 21    266 fe80::9578:400d:2aa:5855/128
                                    On-link
  1    306 ff00::/8                 On-link
 22    266 ff00::/8                 On-link
 21    266 ff00::/8                 On-link
===========================================================================
Persistent Routes:
  None

Open in new window



I tried doing ->

route -p add 190.148.68.22 255.255.255.255 10.106.51.65 metric 1 if 22

i tried this, but i keep getting

C:\Windows\system32\ROUTE.EXE: bad argument 10.106.51.65

Any thoughts?
0
Comment
Question by:Mario Bernheim
  • 2
3 Comments
 
LVL 10

Accepted Solution

by:
Schuyler Dorsey earned 2000 total points
ID: 40014797
Try this instead:

route -p add 190.148.68.22 mask 255.255.255.255 10.106.51.65 metric 1 if 22

You need the word mask in there.
0
 
LVL 10

Expert Comment

by:Schuyler Dorsey
ID: 40014800
0
 

Author Closing Comment

by:Mario Bernheim
ID: 40014817
thank you! that worked...
0

Featured Post

Simplify Active Directory Administration

Administration of Active Directory does not have to be hard.  Too often what should be a simple task is made more difficult than it needs to be.The solution?  Hyena from SystemTools Software.  With ease-of-use as well as powerful importing and bulk updating capabilities.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The recent Microsoft changes on update philosophy for Windows pre-10 and their impact on existing WSUS implementations.
Measuring Server's processing rate with a simple powershell command. The differences in processing rate also was recorded in different use-cases, when a server in free and busy states.
In this Micro Tutorial viewers will learn how to restore their server from Bare Metal Backup image created with Windows Server Backup feature. As an example Windows 2012R2 is used.
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seveā€¦

782 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question