Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

unwanted DHCP-assigend IP on Hyper-V virtual-switch during server-boot

Posted on 2014-04-23
3
Medium Priority
?
436 Views
Last Modified: 2014-11-12
Hello
I got a Hyper-V-Installation on 2012 R2. There are 3 NIC-Teams.

Team 1: For managing Hyper-V-Host / IP manual assigned / MAC-Address ..-..-..-..-..-C0
Team 2: Assigned to Hyper-V-switch1 / MAC-Address ..-..-..-..-..-C3 (Allow management operating system to share this network adapter = disabled)
Team 3: Assigned to Hyper-V-switch2 / MAC-Address ..-..-..-..-..-C1 (Allow management operating system to share this network adapter = disabled)

When I reboot the server, Team 2 and Team 3 get IPs assigned from DHCP despite the fact that the TCP-IP-Protocol isn’t activated on networkadaptar-properties.
After the server is rebooted, the IPs aren’t active anymore but there are wrong entries on DNS-Server making troubles.
Do you have any solution for this problem? Thank you a lot.
0
Comment
Question by:srgmch
  • 2
3 Comments
 
LVL 84

Expert Comment

by:David Johnson, CD, MVP
ID: 40019096
tcpip is enabled on the network switch set your static addresses there
tcpip is enabled on the virtual's
0
 

Accepted Solution

by:
srgmch earned 0 total points
ID: 40059123
it seems, that the problem disappeared...
So I'm not sure, what the problem was in the first place...
0
 

Author Closing Comment

by:srgmch
ID: 40071917
...
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Veeam Backup & Replication has added a new integration – Veeam Backup for Microsoft Office 365.  In this blog, we will discuss how you can benefit from Office 365 email backup with the Veeam’s new product and try to shed some light on the needs and …
A procedure for exporting installed hotfix details of remote computers using powershell
In this Micro Tutorial viewers will learn how to restore their server from Bare Metal Backup image created with Windows Server Backup feature. As an example Windows 2012R2 is used.
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…
Suggested Courses

971 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question