Solved

Firewall FVS318G and set up wireless Router

Posted on 2014-04-24
5
539 Views
Last Modified: 2014-06-09
I would like to set up wireless router with above firewall.  How can I configure it? I have no problem to configure wireless router at home but with the firewall. I don't know how to do that....:-)

I need step by step instruction. Now I am able to login as admin. and  I have full permission to do that

Thanks
0
Comment
Question by:ITsolutionWizard
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 43

Expert Comment

by:Davis McCarn
ID: 40022291
Connect the wireless router to your PC only.  Do not plug anything into the WAN/Internet port.
In the wireless router:
1) Setup the wireless SSID and security -> Save the changes
2) Set the router's ip to one compatible with the FVS318 and out of the way of the other LAN devices (i.e. 192.168.0.250)
3) Turn off DHCP ->Save the Changes
4) Connect one of the wireless' lan ports to the FVS318 and reboot your PC.

The FVS318 will act as the DHCP and any PC's connected to the wireless (wired or not) will be on the same network; but, you won't ever be using the WAN/Internet port on it.
0
 
LVL 1

Author Comment

by:ITsolutionWizard
ID: 40047930
Davis: This is really smart way to do.  And have some questions.

1. Set the router's ip to one compatible with the FVS318 and out of the way of the other LAN devices (i.e. 192.168.0.250) - I don't know what you mean.

it will be better to make me understand if you can send me screenshot. And I really appreciate your helps.
0
 
LVL 43

Expert Comment

by:Davis McCarn
ID: 40048619
I used to have several FVS318's at client sites; but, thay have all been replaced....
Its on page 6-7 of the manual: ftp://downloads.netgear.com/files/FVS318v11_Refguide.pdf
0
 
LVL 1

Author Comment

by:ITsolutionWizard
ID: 40050985
I just need instruction from you what to do. Thanks
0
 
LVL 43

Accepted Solution

by:
Davis McCarn earned 500 total points
ID: 40051053
I've told you what to do and how to do it is in the manual I also gave you a link to.  The only thing you need is the ip address range of the router you want to plug it into.
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We recently endured a series of broadcast storms that caused our ISP to shut us down for brief periods of time. After going through a multitude of tests, we determined that the issue was related to Intel NIC drivers on some new HP desktop computers …
Are you one of those front-line IT Service Desk staff fielding calls, replying to emails, all-the-while working to resolve end-user technological nightmares? I am! That's why I have put together this brief overview of tools and techniques I use in o…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question