Solved

IP address Conflic

Posted on 2014-04-24
4
245 Views
Last Modified: 2014-04-25
I am currently running DHCP on a Windows 2008 R2 server, for some reason I keep getting an IP conflict for the same ip address in my DCHP scope and it has tried to assign this address multiple times is there a way to stop DHCP from trying to give this address and what could be causing this.

Thanks
0
Comment
Question by:ahmad1467
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 38

Expert Comment

by:Hypercat (Deb)
ID: 40021000
If the address is assigned as a static address on some piece of equipment and it also exists in the DHCP scope, then the DHCP server (which doesn't know that the address is assigned statically) will hand it out to another device. Could this be what is happening?  The way to prevent this is to create a DHCP reservation so that DHCP knows that address is already in use.
0
 
LVL 8

Expert Comment

by:Lee Ingalls
ID: 40021007
You need to adjust your DHCP scope range to exclude the conflicting IP.
Make sure you don't have Firewall also acting as a DHCP Server issuing IP's with an overlapping scope.

Let me know if you need instructions where to change the DHCP scope on your Server 2008.
0
 
LVL 2

Expert Comment

by:pablito70
ID: 40021010
I found this article from Technet:

http://technet.microsoft.com/en-us/library/ee941125%28v=ws.10%29.aspx

Otherwise the network card of the workstation may have some hardware problem.

From Server Event Viewer any warnings or errors detected ?

My 2 cents
0
 
LVL 8

Accepted Solution

by:
Lee Ingalls earned 500 total points
ID: 40021058
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OfficeMate Freezes on login or does not load after login credentials are input.
After seeing many questions for JRNL_WRAP_ERROR for replication failure, I thought it would be useful to write this article.
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question