Solved

Server 2008R2 Enterprise Trust Problem

Posted on 2014-04-25
3
321 Views
Last Modified: 2014-05-07
Hello,

I have two domains in which we established a two way trust 2 months ago and it has worked fine.  A week ago this trust started to experience problems with users in one domain being prompted for credentials when trying to access drives in the other.  We can pass admin credentials and the drives will map, but once a user reboots the situation repeats.

For this question, lets call the domains BC and BNLR.

BC can access all resources in BNLR - this trust works
BNLR is prompted for credentials when accessing resources in BC

BNLR shows trusts setup both in Netdom and in GUI (Domains and Trusts)
BC show NO trusts setup in Netdom  or in GUI (Domains and Trusts)

When we try to setup trust again in the BC domain, it says "domain trust already exists"

Any ideas why we cannot see this trust?  And, if we cannot see the trust, how can we delete it and re-setup this trust?
0
Comment
Question by:jhaysbns
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 9

Expert Comment

by:Zenvenky
ID: 40024561
Are both the domains are healthy with regards to AD Replication and Global Catalog. Also please check for Netlogon errors on user's workstation. If you see one troubleshoot it first and then try to access shares. Also update NIC drivers on all servers and workstations whichever has issues.
0
 

Accepted Solution

by:
jhaysbns earned 0 total points
ID: 40036801
We deleted the trust using command line.  Once we removed the original trust we could then use the GUI to re-setup.  After we did this we could then manage the trust from the GUI.  Not sure why the server is behaving this way, we feel there is corruption on the HDD that has caused these issues.  We are going to bring up a new DC and remove this server from AD functions.
0
 

Author Closing Comment

by:jhaysbns
ID: 40046638
Only one comment had been submitted but it did not resolve the problem.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
This article shows how to deploy dynamic backgrounds to computers depending on the aspect ratio of display
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question