?
Solved

setting up cisco swiches from scratch

Posted on 2014-04-25
2
Medium Priority
?
202 Views
Last Modified: 2014-05-09
just got new switches in need to set up a network for 50 users how do I go from here to ensure that all configurations are good to go and the end users are connected. Or from start to finish.

Thanks

Mabale
0
Comment
Question by:mabale
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 11

Accepted Solution

by:
Miftaul earned 2000 total points
ID: 40024305
Setup the ports that connects to host part of your data vlan. Enable portfast on them
Setup an ip address on your management vlan svi and set a default gateway.
Setup trunk on the ports connecting to other switches and allow required vlans over trunk.
0
 

Author Closing Comment

by:mabale
ID: 40055426
Thanks I will try the idea.
0

Featured Post

Prepare for your VMware VCP6-DCV exam.

Josh Coen and Jason Langer have prepared the latest edition of VCP study guide. Both authors have been working in the IT field for more than a decade, and both hold VMware certifications. This 163-page guide covers all 10 of the exam blueprint sections.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Please see preceding article here: http://www.experts-exchange.com/Networking/Operating_Systems/A_11209-Root-Bridge-Election.html Figure 1 After Root Bridge has been elected, then what?..... Let's start by defining a Root Port in la…
Configuring network clients can be a chore, especially if there are a large number of them or a lot of itinerant users.  DHCP dynamically manages this process, much to the relief of users and administrators alike!
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

718 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question