Solved

Partition on RAID

Posted on 2014-04-27
3
182 Views
Last Modified: 2016-12-08
Hi

I would like to delete an ARRAY on my server but I want to be sure wich Windows 2008R2 partition is on this ARRAY.

Is there a way to identifie this?

Thank you
0
Comment
Question by:jpmoreau
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 25

Expert Comment

by:Tony Giangreco
ID: 40025736
If you are running a Dell server, you can log into OSMA (open manager server administrator) and find out where Windows is running and look at the arrays and raids you have.

If you don't have it installed, it's a few download from the Dell site, but you need a Dell server to run it.

If not, reboot and go into the raid controller before windows starts to determine what arrays and disks you have.
0
 

Author Comment

by:jpmoreau
ID: 40025739
I run a HP ProLiant ML370 and I have the Array manager installed in Windows.
0
 
LVL 25

Accepted Solution

by:
Tony Giangreco earned 500 total points
ID: 40025744
Ok, well if you launch that app, you should be able to view the arrays, partitions and see shat O/S is installed.
0

Featured Post

Don't Cry: How Liquid Web is Ensuring Security

WannaCry is just the start. Read how Liquid Web is protecting itself and its customers against new threats.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When we purchase storage, we typically are advertised storage of 500GB, 1TB, 2TB and so on. However, when you actually install it into your computer, your 500GB HDD will actually show up as 465GB. Why? It has to do with the way people and computers…
This article provides a convenient collection of links to Microsoft provided Security Patches for operating systems that have reached their End of Life support cycle. Included operating systems covered by this article are Windows XP,  Windows Server…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
Suggested Courses

630 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question