Solved

networking , routing , vpn mpls, vlan

Posted on 2014-04-27
2
313 Views
Last Modified: 2014-06-15
client have two sites mpls
site A mpls hub central provide internet for site b

on site B will add new vlans , how do i set default route so vlans can get out to internet? . btw there is no firewall , site b don't have their own internet line.

site b
Telepacific MPLS Router: LAN192.168.50.254 / WAN 10.1.30.254
please see attachment
new vlan will be add
192.168.20.x
192.168.30.x
my question is, how do i config on HP switch l3 so the rest of networks (vlans) can bound to remote site A for internet?
current-config-remote-site.JPG
0
Comment
Question by:VN-PC view
2 Comments
 
LVL 9

Accepted Solution

by:
Trenton Knew earned 500 total points
ID: 40026356
I would think you just need to set a route to 0.0.0.0/0 to the wan interface on the switch , and then advertise that route to the mpls router with a routing protocol.
0
 

Author Comment

by:VN-PC view
ID: 40026389
hi Trenton,

sorry my typo wan 10.1.100.254 NOT 10.1.10.254

my MPLS LAN 192.168.100.254
my mpls WAn 10.1.100.254
i am not at the site and will not be there,  we are going to setup equipment  then send over the location
but i have give proper plan how to add more vlans behind what they have currently.
not sure GW 192.168.100.3 and MPLS 192.168.100.254, WAn 10.1.100.254

so if L3 sw add to the plan do i need set default route pointing to MPLS 192.168.100.254  or GW192.168.100.3 for new hp sw?
also do i need to call isp let them know new networks (vlan) so they i can add to their CE\PE routers
can you please more  explain and how?


thank you
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
The use of stolen credentials is a hot commodity this year allowing threat actors to move laterally within the network in order to avoid breach detection.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question