Solved

RAID Expansion

Posted on 2014-04-29
1
188 Views
Last Modified: 2016-12-08
Hi

I have expanded my RAID 10 Array from 4 disks to 6 disks. 300GB each. Total of the the array is 1.6TB 1.0TB usable. The problem is that my partition is 559GB and I don't see nowhere to expand it.

I use Windows Server 2008R2 on a HP ProLiant ML370 with P400 controller.
0
Comment
Question by:jpmoreau
1 Comment
 
LVL 16

Accepted Solution

by:
R. Andrew Koffron earned 500 total points
ID: 40030664
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
A safe way to clean winsxs folder from your windows server 2008 R2 editions
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

14 Experts available now in Live!

Get 1:1 Help Now