AndreasChristoforides
asked on
Cisco Router Series 3900
Guys I am getting all the time this message in my router config. Anyone knows what it is ?
742: %CRYPTO-5-IKMP_AG_MODE_DIS ABLED: Unable to initiate or res
pond to Aggressive Mode while disabled
Rgrds
Andreas
742: %CRYPTO-5-IKMP_AG_MODE_DIS
pond to Aggressive Mode while disabled
Rgrds
Andreas
ASKER
Hey Mozekin,
It appears every 1 minute , will i have issues with my log after ? How can i view these peers ?
It appears every 1 minute , will i have issues with my log after ? How can i view these peers ?
Andreas,
Have a read of the below support page, depending on your environment setup you may be able to get away with adding the host as a peer to stop the informational logs.
Do you know which peers are trying to communicate over IPSec to your router?
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/command/reference/srfipsec.html
Have a read of the below support page, depending on your environment setup you may be able to get away with adding the host as a peer to stop the informational logs.
Do you know which peers are trying to communicate over IPSec to your router?
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/command/reference/srfipsec.html
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Fixed my issue and learned a lot about that message i was getting in the router !!!
Normally, a cisco router will check for aggressive-mode during boot or responding to an IKE request which is what it appears to be with the information you have provided. How often does this message appear? every few minutes or only at initialisation stage? it could just mean that there are some peers trying to connect via IPSEC to your router.