pix/asa routing issue

icdl101
icdl101 used Ask the Experts™
on
Hello I am  trying to route internet traffic through different interface.

we have 3 internet connections however our main connection is down, and I thought the traffic would route over different interface  as they are weighted in order, however that is not the case


the default traffic is getting routed through this Gateway  route outside 0.0.0.0 0.0.0.0 241.41.1.230 1  (Eth 0) which is down at the moment.
so I would like to route the traffic from 10.1.1.x network over the  other interfaces.
route dsl1 0.0.0.0 0.0.0.0 192.168.254.254 2
route dsl2 0.0.0.0 0.0.0.0 172.16.17.254 3

please assist.

I have attached the full config.

thanks in advance
Concorde-Config.txt
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Commented:
For the interim why not make your pri route metric higher, I've had similar problems on a 877 with  pri DSL second bdsl on other router. The dialer interface wouldn't go down even though it was disconnected

Mine was 0.0.0.0 dialer1 10 0.0.0.0 192.168.1.2 20

Author

Commented:
hi I not very familiar with the pix, what commands would I need to run exactly. do I have to remove the route and add it back in .
also does the " global nat command need to be changed as well ?
Commented:
no route outside 0.0.0.0 0.0.0.0 241.41.1.230
route outside 0.0.0.0 0.0.0.0 192.168.254.254 2

to restore
no route outside 0.0.0.0 0.0.0.0 192.168.254.254
route outside 0.0.0.0 0.0.0.0 241.41.1.230

Author

Commented:
thank you for your prompt response

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial