Link to home
Start Free TrialLog in
Avatar of CaptainGiblets
CaptainGibletsFlag for United Kingdom of Great Britain and Northern Ireland

asked on

Sonicwall NSA 2600 and 1 way Audio VOIP

I am trying to separate my 255.255.254.0 subnet into smaller subnets for segregation.

I have a layer 2 dell power connect 3448p switch that I have created 2 vlans on 9 for phones and 5 for clients. I have tagged the port my phone is in to into both 9 and 5. Through the config on my phone I have set it to vlan 9 and it has a separate network card for the pc which I have set to vlan 5.

I then have another port which is plugged into my dell sonicwall nsa 2600. In here I have created 2 new zones, Clients and VOIP which are under port X2:V5 and X2:V9. All the routes between my trusted interfaces were created properly and my PC can still talk to the servers on the original subnet and my phone boots up fine both on the correct VLAN.

The only problem is my phone when receiving or making calls only has 1 way audio. They can hear me but I cannot hear them, I have checked all the routes etc and everything seems fine. Does anyone know what could cause this issue?
ASKER CERTIFIED SOLUTION
Avatar of Blue Street Tech
Blue Street Tech
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Glad I could help...thanks for the points!