mmercaldi
asked on
%Insufficient DSP resources to create the ds0-group Cisco 1760
I am building a lab environment for my ccnp voice using a 1760 cisco router and an 1841 router
On my 1760 router I am getting the following error message when setting up the t1 controller:
voicertr1(config-controlle r)#ds0-gro up 0 timeslots 1-24
%Insufficient DSP resources to create the ds0-group
I checked my inventory and I do have DSP's
NAME: "DSP Module Slot 0", DESCR: "Packet Voice DSP Module Slot 0"
PID: Packet Voice DSP Module Slot 0, VID: , SN:
NAME: "DSP Module 0", DESCR: "Packet Voice DSP Module with 1 C549 DSPs"
PID: Packet Voice DSP Module with 1 C549 DSPs, VID: 3.2, SN: ICP0642005Z
NAME: "DSP Port 0/0", DESCR: "C549"
PID: C549 , VID: , SN:
NAME: "DSP Module Slot 1", DESCR: "Packet Voice DSP Module Slot 1"
PID: Packet Voice DSP Module Slot 1, VID: , SN:
NAME: "FastEthernet0/0", DESCR: "PQUICC_FEC"
PID: PQUICC_FEC , VID: , SN:
What should I do? I also tried decreasing the range of time slots to 1-5 and still no luck
On my 1760 router I am getting the following error message when setting up the t1 controller:
voicertr1(config-controlle
%Insufficient DSP resources to create the ds0-group
I checked my inventory and I do have DSP's
NAME: "DSP Module Slot 0", DESCR: "Packet Voice DSP Module Slot 0"
PID: Packet Voice DSP Module Slot 0, VID: , SN:
NAME: "DSP Module 0", DESCR: "Packet Voice DSP Module with 1 C549 DSPs"
PID: Packet Voice DSP Module with 1 C549 DSPs, VID: 3.2, SN: ICP0642005Z
NAME: "DSP Port 0/0", DESCR: "C549"
PID: C549 , VID: , SN:
NAME: "DSP Module Slot 1", DESCR: "Packet Voice DSP Module Slot 1"
PID: Packet Voice DSP Module Slot 1, VID: , SN:
NAME: "FastEthernet0/0", DESCR: "PQUICC_FEC"
PID: PQUICC_FEC , VID: , SN:
What should I do? I also tried decreasing the range of time slots to 1-5 and still no luck
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Do you have:
Voice-card 0
dspfarm
dsp services dspfarm