• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 304
  • Last Modified:

Sub-Interface not connecting to Internet

I have a sub-interface 'on' the inside (see below) and setup the VLAN ID  --> Connected the VLAN to the SWITCH and  routed to the PORT.  The Server(s) recognize the 'new' VLAN / IPs; but do not have connectivity to the internet.
My assumption is it's at the gateway? Also; I can ping an IP on the inside interface from the VLAN, but not the inside interface itself.

!
interface GigabitEthernet0/1
 speed 100
 duplex full
 nameif Inside
 security-level 100
 ip address 10.10.10.1 255.255.255.0
!
interface GigabitEthernet0/1.20
 vlan 20
 nameif IOS_DC
 security-level 100
 ip address 10.10.2.1 255.255.255.0
!
0
Spt_Us
Asked:
Spt_Us
  • 2
1 Solution
 
Matt VCommented:
Do you have NAT rules for the second subnet/interface?
0
 
Spt_UsAuthor Commented:
No; I wasn't sure I needed to NAT it for any reason. Do I need to NAT It???
0
 
Spt_UsAuthor Commented:
That was IT! THANKS.....
0

Featured Post

What Security Threats Are We Predicting for 2018?

Cryptocurrency, IoT botnets, MFA, and more! Hackers are already planning their next big attacks for 2018. Learn what you might face, and how to defend against it with our 2018 security predictions.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now