Solved

Cisco DMVPN Show Commands

Posted on 2014-07-26
4
929 Views
Last Modified: 2014-08-05
Hello Experts,

Can someone please let me know what version of IOS supports the show command:

show dmvpn?

I can issue all other show commands e.g show ip nhrp detail, show ip nhrp detail etc., but I don't see the option for show dmvpn.

Cheers

Carlton
0
Comment
Question by:cpatte7372
  • 2
  • 2
4 Comments
 
LVL 15

Accepted Solution

by:
deepdraw earned 500 total points
ID: 40222368
i found this http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/s1/sec-s1-cr-book/sec-cr-s4.html#wp2815505246

Command History
Release

Modification

12.4(9)T

This command was introduced.

12.4(20)T

This command was modified. The following were added: ipv4, ipv6, ipv6-address, network,and ipv6-address.

12.4(22)T

This command was modified. The output of this command was extended to display the NHRP group received from the spoke and the Quality of Service (QoS) policy applied to the spoke tunnel.

15.2(1)T

This command was modified. Theipv6-address argument was added.

also another overview
http://www.cisco.com/c/dam/en/us/products/collateral/security/dynamic-multipoint-vpn-dmvpn/DMVPN_Overview.pdf

Regards

Greg
0
 

Author Comment

by:cpatte7372
ID: 40231205
Greg,

That's great, however I don't know what version of IOS this is command can be applied to?

Regards
0
 
LVL 15

Expert Comment

by:deepdraw
ID: 40232121
This is the ios version the command was first used in 12.4(9)T

Regards

Greg
0
 

Author Closing Comment

by:cpatte7372
ID: 40241566
Cheers
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

22 Experts available now in Live!

Get 1:1 Help Now