Solved

Need to Configure DD-WRT to Pass all traffic through Connected Server

Posted on 2014-07-27
2
643 Views
Last Modified: 2014-08-03
Here is the situation. On a temporary basis I only have Wireless Access at one site,
Currently the main server is connecting via wireless and I have a DD-WRT router to connect to the other 3 servers, the problem being that I cannot access the internet from the other machines,
Network Diagram
wireless on ethernet 1 (192.168.1.200), ethernet (192.168.11. Subnet) connected to dd-wrt lan port, other servers connected to dd-wrt lan ports
My-Network.jpg
0
Comment
2 Comments
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40222578
Just curious but why did you set it up like that?

I would have brought the wireless access straight to the DD-WRT WAN port, then use NAT at the DD-WRT to provide internet access over the wireless link.  All servers would then use the switch on the DD-WRT LAN side (assuming it's an 8-port switch on the router as in your pic).
0
 
LVL 80

Author Comment

by:David Johnson, CD, MVP
ID: 40222727
How does one bring wireless access directly to the WAN port? I know of USB wireless but not ethernet wireless.. would this be in the wireless settings of the DD-WRT?
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For many of us, the  holiday season kindles the natural urge to give back to our friends, family members and communities. While it's easy for friends to notice the impact of such deeds, understanding the contributions of businesses and enterprises i…
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question