Solved

SBS2011 RADIUS setup

Posted on 2014-07-30
3
440 Views
Last Modified: 2014-08-01
I am using SBS2011 acting also as a RADIUS server.
I need the RADIUS server to provide internal IP address to the VPN clients (they authenticate via the RADIUS)
How/where do I configure the RADIUS to do it?
0
Comment
Question by:ivolach
  • 2
3 Comments
 
LVL 42

Expert Comment

by:kevinhsieh
ID: 40230679
What is your VPN server? Normally your VPN server hands out the IP addresses. I wouldn't get the RADIUS server involved unless you wanted a specific IP address assigned to a specific user.
0
 

Author Comment

by:ivolach
ID: 40230736
The VPN server is handing out the IP addresses from a different IP range, but it cannot provide IP address from the internal address space.  

I thought I need it to support a specific application but apparently it is not required so at this point it is merely a point of interest, for just in case.

Thanks,
0
 
LVL 42

Accepted Solution

by:
kevinhsieh earned 500 total points
ID: 40232766
What you are looking for is the Framed-IP-Address attribute, which tells what the IP address should be or the pool from which to pull an address.

http://social.technet.microsoft.com/Forums/windowsserver/en-US/11c5a2cc-a31e-4e90-831c-4d78349f6bf5/nps-and-serverside-ip-pooling?forum=winserverNIS
http://www.radiusreporting.com/IAS-Standard-Attribute-Table.html
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ASA 5520 problem with Failover in Active/Standby 8 64
reserve ip address for mac address in ubuntu dhcp server 2 71
l2tp tunnel from pc to router 14 85
Gateway Resilience 4 56
Are you one of those front-line IT Service Desk staff fielding calls, replying to emails, all-the-while working to resolve end-user technological nightmares? I am! That's why I have put together this brief overview of tools and techniques I use in o…
An article on effective troubleshooting
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question