Solved

2012 Hyper V setup on separate network card

Posted on 2014-07-31
1
1,071 Views
Last Modified: 2014-11-12
Hi,

Just learn that best practice is to set an hyper v network on a separate NIC.
If I understand correctly, one NIC is dedicated for the Hyper V host, and another NIC for all VHD's.
I cannot find the steps on how to set it up correctly.

would you know of any tutorials will take me steps by steps on how to achieve this?

Thanks
0
Comment
Question by:defrey
1 Comment
 
LVL 57

Accepted Solution

by:
Cliff Galiher earned 500 total points
ID: 40231109
You can dedicate network card(s) to VMs, yes. The setup is simple. Jn Hyper-V manager, create an external switch, name it, select a network card, and make sure the check box to allow the management OS is *unchecked.* That will dedicate the NIC you chose to the switch. And any VMs you create and add virtual adapter to with that switch attached will use that NIC.

Any NIC *not* attached to a virtual switch can be used exclusively by the management OS. Thus the clean separation.
0

Featured Post

What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Resolve DNS query failed errors for Exchange
It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
In this Micro Tutorial viewers will learn how they can get their files copied out from their unbootable system without need to use recovery services. As an example non-bootable Windows 2012R2 installation is used which has boot problems.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question