?
Solved

Bacula backups hang on volume for over WAN clients

Posted on 2014-07-31
3
Medium Priority
?
472 Views
Last Modified: 2014-08-07
I can backup local clients but when I try to backup through the wan I get

31-Jul 22:43 bacula-dir JobId 35: No prior Full backup Job record found.
31-Jul 22:43 bacula-dir JobId 35: No prior or suitable Full backup found in catalog. Doing FULL backup.
31-Jul 22:43 bacula-dir JobId 35: Start Backup JobId 35, Job=Linux3.2014-07-31_22.43.37_48
31-Jul 22:43 bacula-dir JobId 35: Using Device "ITBstore"

And it just sits there until I bounce the bacula-fd service on the client (system im trying to backup)




But any local jobs I run work and get messages like so
2014-07-31 21:33:42      bacula-dir JobId 31: Start Backup JobId 31, Job=jm-Linux.2014-07-31_21.33.40_43
2014-07-31 21:33:42      bacula-dir JobId 31: Using Device "ITBstore"
2014-07-31 21:33:43      bacula-sd JobId 31: Volume "Default0002" previously written, moving to end of data.
2014-07-31 21:33:43      bacula-sd JobId 31: Ready to append to end of Volume "Default0002" size=5267879
2014-07-31 21:33:43      bacula-sd JobId 31: Job write elapsed time = 00:00:01, Transfer rate = 715.4 K Bytes/second

And they continue on to complete
0
Comment
Question by:Sitewizard
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 43

Expert Comment

by:Davis McCarn
ID: 40235274
I took a quick look at the manual and can't tell if Bacula can use an ip address for the destination; but, you definitely need to forward ports 9101-9103 in your router: http://www.bacula.org/5.0.x-manuals/en/problems/problems/Dealing_with_Firewalls.html
0
 

Author Comment

by:Sitewizard
ID: 40235292
I have them all forwarded on my local pfsense router to the correct system and on the iptables I have the following

-A INPUT -p tcp -m state --state NEW -m tcp --dport 9101 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 9102 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 9103 -j ACCEPT
0
 
LVL 43

Accepted Solution

by:
Davis McCarn earned 2000 total points
ID: 40235344
Unless Bacula will let you set the WAN ip of your backup system as the destination, you need to add an entry to the HOSTS file on the clients PC(s) so they can find you.
You can test with PING <yourbackuppcname> in a CMD window.
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Workplace bullying has increased with the use of email and social media. Retain evidence of this with email archiving to protect your employees.
Are you looking to recover an email message or a contact you just deleted mistakenly? Or you are searching for a contact that you erased from your MS Outlook ‘Contacts’ folder and now realized that it was important.
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
Suggested Courses

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question