• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 496
  • Last Modified:

Nexus 7K ,5K and 2K deployment

Hi ,

We have two Nexus 7010 sereis
and two 5k and four 2K.

1. I have gone through the Videos/Doc's and as per the docs we have designed VPC's in both 7K and 2K chasis
                   
   1.What design related issues araise if we enable  vPC in both 7K and Both 5K chasis.

2. If it is fine then what are the advantages

3. If it not good practice , what are the issues may araise?

 Regards
 ram
0
RAMU CH
Asked:
RAMU CH
1 Solution
 
Garry GlendownConsulting and Network/Security SpecialistCommented:
It might be helpful if you could post some drawing of how you have the boxes designed, as well as what results you wish to get ...
0
 
Ken BooneNetwork ConsultantCommented:
So go to this link:

http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

This is the vpc best practices guide and it shows examples of how to do 7ks with 5ks.  If you are going to set this up I highly recommend reading through this guide.

This should answer all your questions.
0
 
RAMU CHAuthor Commented:
Thanks
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now