[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 214
  • Last Modified:

I am getting error on eth1 on oracle linux 5.2 " there is no link ..check the cable "

e1e2details :

server is R720
I have installed Oracle linux 5.2
Cisco switch sees the connection , but no mac of the eth0
I am attaching screenshots of the error and the ifcfg-eth1 files
we have checked vlans and cabling at the datacenter.
Any ideas ?
0
c_hockland
Asked:
c_hockland
  • 3
1 Solution
 
Zephyr ICTCloud ArchitectCommented:
I had this happen once where the mac-address was not the same as the one belonging to the network card, I doubt it will be the same problem here, but was the first thing I thought about.

Another thing I've read somewhere is to aff NM_CONTROLLED to the ifcfg-eth0/1 file, even if it really isn't needed, it seemed to help for some.
0
 
c_hocklandAuthor Commented:
i 2chedked the mac address and confirmed they are correct.
I just cant ping the default GW from the Linux server.
i checked the network file at /etc/sysconfig and
i have

networking=yes
hostname=abc
Gateway=1.1.1.1
0
 
Zephyr ICTCloud ArchitectCommented:
You could try by adding the "NM_CONTROLLED=yes" in the ifcfg-eth1 file, if you didn't already try ...

I'll have another think ... Getting late here :)
0
 
Zephyr ICTCloud ArchitectCommented:
Any update on the issue?
0
 
SandyCommented:
what is the output of #ethtool eth1 ?

TY/SA
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now