• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1295
  • Last Modified:

Cisco ASA 5525-X Add additional IP address space to outside interface

I have a Cisco ASA 5525-X running 8.6(1)2.

We have utilized all of the IP address space that our ISP initially provided to us. The ISP has assigned an additional non-contiguous block of addresses to us.

The ASA doesn't support secondary addresses on interfaces. What other options do I have?

Break the outside interface into sub-interfaces and trunk with dot1q. How would I handle routing with 2 (or more) external interfaces (which to use as default)?

Set up a second physical outside interface. Again, how to handle routing with 2 (or more external interfaces?

Other ideas?
Robert Briley
Robert Briley
1 Solution
Jan SpringerCommented:
you don't put it on as a secondary.

as long as your provider routes it to you and you configure either the static nat entries or the nat pool, it will work
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Tackle projects and never again get stuck behind a technical roadblock.
Join Now