Wsus Error in SCCM 2012
Dear Experts,
We have here server 2008 R2 configured with SCCM 2012 SP1. It was installed by another IT guy. Previously he configured Software update but it was not getting pushed to the client computers . Clients are only having windows 7.
I am totally new to this server world. I removed this WSUS from the server . After that when ever i try to configure WSUS it gives error. Removal method was i went to the server manager & removed the tick mark from the Windows Server Update service.after that restarted the server. As all the client computers does not have internet connection. the windows & also the sccm endpoint protection are not getting updated for the last Seven months.
Have attached some screen shots . Please help me in configuring WSUS & also the Software update point so that all the users can get their windows & endpoint protection updated.
Regards,
JCT
We have here server 2008 R2 configured with SCCM 2012 SP1. It was installed by another IT guy. Previously he configured Software update but it was not getting pushed to the client computers . Clients are only having windows 7.
I am totally new to this server world. I removed this WSUS from the server . After that when ever i try to configure WSUS it gives error. Removal method was i went to the server manager & removed the tick mark from the Windows Server Update service.after that restarted the server. As all the client computers does not have internet connection. the windows & also the sccm endpoint protection are not getting updated for the last Seven months.
Have attached some screen shots . Please help me in configuring WSUS & also the Software update point so that all the users can get their windows & endpoint protection updated.
Regards,
JCT
ASKER
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Make sure you have enough storage space for updates (750GB-1TB)
ASKER
Hi,
Still i am getting the same error.The update could not be found there may be a network connection issue. sometimes I am unable to browse microsoft sites in the sever. Even if i do windows online update through control panel it gives me error code 80072efd.
Here we have a firewall device which is controlled by network team. The main guy who has configured it is not here. If in the device microsoft updates sites are not mentioned will it block the updates from the Microsoft sites.
I have attached the error image.
Regards,
JCT
Update-error.jpg
Still i am getting the same error.The update could not be found there may be a network connection issue. sometimes I am unable to browse microsoft sites in the sever. Even if i do windows online update through control panel it gives me error code 80072efd.
Here we have a firewall device which is controlled by network team. The main guy who has configured it is not here. If in the device microsoft updates sites are not mentioned will it block the updates from the Microsoft sites.
I have attached the error image.
Regards,
JCT
Update-error.jpg
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi ,
I have not installed wsus on sccm sever . Getting the error when trying to configure WSUS from add role option.I have attached the error image.
Regards,
JCT
Wsus-error.jpg
I have not installed wsus on sccm sever . Getting the error when trying to configure WSUS from add role option.I have attached the error image.
Regards,
JCT
Wsus-error.jpg
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi ,
I have downloaded the exe file of Wsus which is of 84 mb. Will keep you updated.
Regards,
JCT
I have downloaded the exe file of Wsus which is of 84 mb. Will keep you updated.
Regards,
JCT
ASKER
Hi Vaseem,
The Wsus installation has completed successfully. Now i will start adding the Sup roles in the SCCM 2012 console. Will keep you updated. As friday & Saturday is the weekend here if i am unable to update today then on Sunday i will update the status of it. I have attached the image of WSUS console. But when i go to all computers option it shows blank.
Thank you very much.
Regards,
JCT
Wsus-configured.jpg
The Wsus installation has completed successfully. Now i will start adding the Sup roles in the SCCM 2012 console. Will keep you updated. As friday & Saturday is the weekend here if i am unable to update today then on Sunday i will update the status of it. I have attached the image of WSUS console. But when i go to all computers option it shows blank.
Thank you very much.
Regards,
JCT
Wsus-configured.jpg
from now on don't open WSUS console.
Is your WSUS on same server as SCCM or its a different server.
Is your WSUS on same server as SCCM or its a different server.
ASKER
Hi ,
Yes the wsus is on the same server i.e. on sccm. before your message i clicked the synchronization option. tillnow it downloaded 12%. shall i stop it. Have attached the image.
regards,
JCT
Wsus-downloading-updates.jpg
Yes the wsus is on the same server i.e. on sccm. before your message i clicked the synchronization option. tillnow it downloaded 12%. shall i stop it. Have attached the image.
regards,
JCT
Wsus-downloading-updates.jpg
better stop it, all updates are managed from SCCM I did mention it before.
Before you make more configs, go through the link I send you.
ASKER
Hi Vaseem,
I have stopped the synchronization. Ok . I will go through the below mentioned link.:-
http://www.windows-noob.com/forums/index.php?/topic/5683-using-system-center-2012-configuration-manager-part-5-adding-wsus-adding-the-sup-role-deploying-the-configuration-manager-client-agent/
As per your advice.
After going through it shall i proceed configuring SUP on the sccm server.as mentioned in the above link.
Is there any issue if Wsus is on the same server. Will update you on Sunday.
Regards,
JCT
I have stopped the synchronization. Ok . I will go through the below mentioned link.:-
http://www.windows-noob.com/forums/index.php?/topic/5683-using-system-center-2012-configuration-manager-part-5-adding-wsus-adding-the-sup-role-deploying-the-configuration-manager-client-agent/
As per your advice.
After going through it shall i proceed configuring SUP on the sccm server.as mentioned in the above link.
Is there any issue if Wsus is on the same server. Will update you on Sunday.
Regards,
JCT
You and proceed with the configuration using the article as the reference.
ASKER
Hi Vaseem,
Thanks a lot. On Sunday i will update you.
Regards,
JCT
Thanks a lot. On Sunday i will update you.
Regards,
JCT
ASKER
Hi Vaseem,
I have attached the image . by default the two options are selected. do i need to change or shall i proceed by clicking next. The server i am using is 2008 R2
Waiting for your reply.
JCT
Sup-configuring.jpg
I have attached the image . by default the two options are selected. do i need to change or shall i proceed by clicking next. The server i am using is 2008 R2
Waiting for your reply.
JCT
Sup-configuring.jpg
as per your previous screenshot of WSUS console, WSUS is configured to use 8530 port.
select the Second option "WSUS is config to use 8530"
select the Second option "WSUS is config to use 8530"
ASKER
Hi ,
I have selected the second options as per your advice . Also selected allow-intranet only client connections. Is it ok
Jct
I have selected the second options as per your advice . Also selected allow-intranet only client connections. Is it ok
Jct
ASKER
Hi ,
I have configured the SUP role for the SCCM Server.
Regards,
JCT
I have configured the SUP role for the SCCM Server.
Regards,
JCT
ASKER
Hi ,
So my next step is to go to the domain server & configure the GPO for it. Got little bit confused.
Regards,
JCT
So my next step is to go to the domain server & configure the GPO for it. Got little bit confused.
Regards,
JCT
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi Vaseem,
As mentioned in the below site I have did the gpo settings in the domain server for specify intranet service , then did the Client Installation Settings and then select Software Update-Based Client Installation in sccm server & also configured Automatic update for every day 9am & selected the 4th option Auto download & schedule the install this also in the sccm server. But when i check the windows update in one of the client computer it gives error. Have attached the images of the configuration that i did today.
http://www.windows-noob.com/forums/index.php?/topic/5683-using-system-center-2012-configuration-manager-part-5-adding-wsus-adding-the-sup-role-deploying-the-configuration-manager-client-agent/
Regards,
JCT
Automatic-Updates-in-sccm-server.jpg
GPO-for-Windows-update-in-domain.jpg
Windows-update-in-client-computer.jpg
Error-Windows-update-in-client-computer.
As mentioned in the below site I have did the gpo settings in the domain server for specify intranet service , then did the Client Installation Settings and then select Software Update-Based Client Installation in sccm server & also configured Automatic update for every day 9am & selected the 4th option Auto download & schedule the install this also in the sccm server. But when i check the windows update in one of the client computer it gives error. Have attached the images of the configuration that i did today.
http://www.windows-noob.com/forums/index.php?/topic/5683-using-system-center-2012-configuration-manager-part-5-adding-wsus-adding-the-sup-role-deploying-the-configuration-manager-client-agent/
Regards,
JCT
Automatic-Updates-in-sccm-server.jpg
GPO-for-Windows-update-in-domain.jpg
Windows-update-in-client-computer.jpg
Error-Windows-update-in-client-computer.
Did you set the client settings for software updates?
Did the new GPO settings applied to client computer?
Run gpupdate /force Restart the computer and run gpupdate /force again.
Run rsop.msc and see if the settings are in place.
while running the updates use cmd and run netstat to see what connections are made to SCCM.
Did the new GPO settings applied to client computer?
Run gpupdate /force Restart the computer and run gpupdate /force again.
Run rsop.msc and see if the settings are in place.
while running the updates use cmd and run netstat to see what connections are made to SCCM.
ASKER
Hi Vaseem,
By typing rsop.msc on the client computer it shows me windows update configuration. I selected the 4th option for the automatic update & also the time selected is 9am everyday. But it shows the 3rd option & also the time showing is 10am. In the specify intranet service i have given the FQDN of the sccm server but it shows as http://servernameonly. No .com or the port that i specified .I have enabled the client based software installation in the sccm server.Also this new gpo i have applied to one OU for testing only. Have run gpupdate /force several times & also restarted the client computer .
You mentioned while running the updates use cmd and run netstat to see what connections are made to SCCM. When i run netstat it shows all the active connections. I have attached the image.
Regards,
JCT
gposetting.jpg
gposetting1.jpg
By typing rsop.msc on the client computer it shows me windows update configuration. I selected the 4th option for the automatic update & also the time selected is 9am everyday. But it shows the 3rd option & also the time showing is 10am. In the specify intranet service i have given the FQDN of the sccm server but it shows as http://servernameonly. No .com or the port that i specified .I have enabled the client based software installation in the sccm server.Also this new gpo i have applied to one OU for testing only. Have run gpupdate /force several times & also restarted the client computer .
You mentioned while running the updates use cmd and run netstat to see what connections are made to SCCM. When i run netstat it shows all the active connections. I have attached the image.
Regards,
JCT
gposetting.jpg
gposetting1.jpg
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi Vaseem,
Its the user account in the same OU that i have applied. Do you want me to created a new OU & add the computers to it.
Regards,
JCT
Its the user account in the same OU that i have applied. Do you want me to created a new OU & add the computers to it.
Regards,
JCT
GPO settings is computer based not user. The settings r applied on computer acct, place the computer object in the OU
ASKER
Hi ,
I have created a new OU & placed that particular computer on to it. Linked the OU with the gpo. Did run gpupdate /force. Now when i run rsop.msc on the client computer it shows in the specity intranet service FQDN of the sccm server But in the automatic updates it still shows the 3rd option & time set to 10am. restarted the client computer serveral times & also run the option gpupdate /force. When i click the option check for updates again it gives the same error.
Regards,
JCT
I have created a new OU & placed that particular computer on to it. Linked the OU with the gpo. Did run gpupdate /force. Now when i run rsop.msc on the client computer it shows in the specity intranet service FQDN of the sccm server But in the automatic updates it still shows the 3rd option & time set to 10am. restarted the client computer serveral times & also run the option gpupdate /force. When i click the option check for updates again it gives the same error.
Regards,
JCT
ASKER
Hi Vaseem,
Previously I configured the Automatic updates in the sccm server. Now I configured it on the domain server & selected the 4th option & time set is 13:00. When I run the command rsop.msc in the client computer it gives me exact settings.
But when clicking check for updates it gives me the same error:-800B0001
Regards,
JCT
Previously I configured the Automatic updates in the sccm server. Now I configured it on the domain server & selected the 4th option & time set is 13:00. When I run the command rsop.msc in the client computer it gives me exact settings.
But when clicking check for updates it gives me the same error:-800B0001
Regards,
JCT
which version of WSUS have you installed?
ASKER
Hi Vaseem,
WSUS 3.0 SP2 is installed
JCT
WSUS 3.0 SP2 is installed
JCT
have you tried searching for the error code on google?
http://www.urtech.ca/2012/07/solved-updates-from-the-wsus-server-result-in-error-800b0001-since-latest-windows-update-agent-installed/
http://www.urtech.ca/2012/07/solved-updates-from-the-wsus-server-result-in-error-800b0001-since-latest-windows-update-agent-installed/
ASKER
Hi Vaseem ,
Ya i have searched it in google but was confused. Now i am downloading the hotfix after that i will run it on the sccm server in which wsus is configured & will check the client computer after that.
Regards,
JCT
Ya i have searched it in google but was confused. Now i am downloading the hotfix after that i will run it on the sccm server in which wsus is configured & will check the client computer after that.
Regards,
JCT
ASKER
Hi ,
I have downloaded the hotfix & did accordingly what is mentioned in the site. But still the same problem. I am downloading the second hotfix which is mentioned in the site. Will update you tomorrow.
JCT
I have downloaded the hotfix & did accordingly what is mentioned in the site. But still the same problem. I am downloading the second hotfix which is mentioned in the site. Will update you tomorrow.
JCT
ASKER
Hi Vaseem,
After installing the second update from the below site if i go the control panel of the client computer it shows as windows is up to date. Now there is no error if i check for the updates.But the last update it shows as 8/5/2014. As mentioned in the site it does not installed Configuration Manager Client.But in the installed update history it shows Windows update agent is installed on 31/8/2014. I have attached the images which belongs to one of the client computer.
http://www.urtech.ca/2012/07/solved-updates-from-the-wsus-server-result-in-error-800b0001-since-latest-windows-update-agent-installed.
Regards,
JCT
Windows-update-in-client-computer.jpg
installed-updates.jpg
After installing the second update from the below site if i go the control panel of the client computer it shows as windows is up to date. Now there is no error if i check for the updates.But the last update it shows as 8/5/2014. As mentioned in the site it does not installed Configuration Manager Client.But in the installed update history it shows Windows update agent is installed on 31/8/2014. I have attached the images which belongs to one of the client computer.
http://www.urtech.ca/2012/07/solved-updates-from-the-wsus-server-result-in-error-800b0001-since-latest-windows-update-agent-installed.
Regards,
JCT
Windows-update-in-client-computer.jpg
installed-updates.jpg
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Hi Vaseem,
The versions are same. As mentioned in the site it does not installed Configuration Manager Client , will it create any problem.
Regards,
JCT
The versions are same. As mentioned in the site it does not installed Configuration Manager Client , will it create any problem.
Regards,
JCT
No problems.
I believe the problem that you have with regards to WSUS error mentioned in 1st post has been solved.
I believe the problem that you have with regards to WSUS error mentioned in 1st post has been solved.
ASKER
Hi Vaseem,
Yes the problem with the WSUS has been solved. Now I am just going through the remaining configuration for the SUP.
Regards,
JCT
Yes the problem with the WSUS has been solved. Now I am just going through the remaining configuration for the SUP.
Regards,
JCT
ASKER
Hi Vaseem,
I have also configured the application catalog. In the client side in software center when i select find additional applications from the application catalog it gives error 404:- file or directory not found. Also can you please confirm what all configurations i have to after Application catalog configuration.
Regards,
JCT
I have also configured the application catalog. In the client side in software center when i select find additional applications from the application catalog it gives error 404:- file or directory not found. Also can you please confirm what all configurations i have to after Application catalog configuration.
Regards,
JCT
This question does not have any relation with the issue mentioned in your initial post.
If the issue related to WSUS Error has been solved, Please close this question and submit a new question.
If the issue related to WSUS Error has been solved, Please close this question and submit a new question.
ASKER
Hi Vaseem ,
Ok I will post a new question. Thanks a lot for your support.
Regards,
JCT
Ok I will post a new question. Thanks a lot for your support.
Regards,
JCT
ASKER
Still i am waiting for experts help. I have attached the Wsus error. In the server there is an internet connection & also i can browse microsoft & all other sites.
Regards,
JCT