Link to home
Start Free TrialLog in
Avatar of nurturer69
nurturer69

asked on

Setup to run an .ISO from HP Intelligent Provisioning.

I have a firmware upgrade .ISO that needs to be run on a VMware 5.5 host that currently resides on the D: drive of our VCenter server.

Anyone know how I can mount the .ISO as a CD/DVD ROM on the problem host so that when I reboot the host it will run the .ISO?

Is there somewhere in the ILO4's Intelligent Provisioning where I can do this?
Avatar of dhoppel
dhoppel
Flag of United States of America image

With the drive connected (if it's external) you need to mash the F11 key while booting to get the boot prompt, that'll allow you to choose to boot from a disk (usb or dvd)
Avatar of nurturer69
nurturer69

ASKER

I need to boot an ISO that resides on another server's drive. Is that possible, or do I need to move the .ISO to another location?
ASKER CERTIFIED SOLUTION
Avatar of dhoppel
dhoppel
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial