Solved

Cisco WLC Flex 7500 FUS Version

Posted on 2014-09-03
3
339 Views
Last Modified: 2014-09-10
Where on my WLC can I see the FUS version.
0
Comment
Question by:ciscosupp
  • 2
3 Comments
 
LVL 45

Expert Comment

by:Craig Beck
ID: 40302099
SSH to the CLI and use the show sysinfo command.
0
 

Author Comment

by:ciscosupp
ID: 40302227
I run show sysinfo before but could not see FUS version.
Please see attached my output of show sysinfo.
show-sysinfo.jpg
0
 
LVL 45

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40302355
Sorry, ignore me.  The 7500 doesn't need the FPGA, etc, so you don't see it in sysinfo.  The FUS only upgrades the RAID firmware on the 7500 and there are no commands to confirm the firmware version.

Judging by the boot loader I'd guess you haven't got FUS1.7 OR 1.9 on the WLC.  If you had 1.9 installed the boot loader would be 7.6.
0

Featured Post

Live: Real-Time Solutions, Start Here

Receive instant 1:1 support from technology experts, using our real-time conversation and whiteboard interface. Your first 5 minutes are always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
Using in-flight Wi-Fi when you travel? Business travelers beware! In-flight Wi-Fi networks could rip the door right off your digital privacy portal. That’s no joke either, as it might also provide a convenient entrance for bad threat actors.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question