Solved

Can not copy files from flash drive

Posted on 2014-09-04
8
151 Views
Last Modified: 2014-09-21
Can not copy files from flash drive
errno 5. in the end of copy operation.  This is related to Linux.

Also this flash is not identified in Windows.
it's occured after I have put other flash with AES 256 encryption.
0
Comment
Question by:Nusrat Nuriyev
  • 4
  • 4
8 Comments
 
LVL 90

Expert Comment

by:John Hurst
Comment Utility
Is this a flash drive created in Windows?  If so, it appears to be damaged.

What does this mean: "put other flash with AES 256 encryption"? What does that have to do with the first key?

Usually when a flash drive goes bad, there is not much you can do with them and you have to replace them.
0
 

Author Comment

by:Nusrat Nuriyev
Comment Utility
yes, it is created in Windows.
Another flash with encryption  may change the policy of the whole system... that is the hypothesis.
0
 
LVL 90

Expert Comment

by:John Hurst
Comment Utility
Another flash with encryption  may change the policy of the whole system

I have not seen that. You are suggesting someone gives you a file on their flash drive and it becomes encrypted so they cannot use it?  I did not think that was the case.

Is your whole system encrypted?
0
 

Author Comment

by:Nusrat Nuriyev
Comment Utility
Yes, probably. And maybe it's just coincidence. No just flash, you put the password, and after that you can use it.
0
Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

 

Author Comment

by:Nusrat Nuriyev
Comment Utility
Here is the dmesg output related with the error:

[15785.743387] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15785.914289] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.088200] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.262119] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.435992] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.609914] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.695876] sd 10:0:0:0: [sdc] Unhandled error code
[15786.695881] sd 10:0:0:0: [sdc]  
[15786.695883] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15786.695884] sd 10:0:0:0: [sdc] CDB:
[15786.695886] Read(10): 28 00 00 2f 5d 20 00 00 f0 00
[15786.695892] end_request: I/O error, dev sdc, sector 3104032
[15786.775820] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15786.947728] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.119631] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.291441] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.463439] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.635214] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.721437] sd 10:0:0:0: [sdc] Unhandled error code
[15787.721443] sd 10:0:0:0: [sdc]  
[15787.721445] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15787.721447] sd 10:0:0:0: [sdc] CDB:
[15787.721448] Read(10): 28 00 00 2f 5e 10 00 00 20 00
[15787.721454] end_request: I/O error, dev sdc, sector 3104272
[15787.816251] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15787.988148] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15788.159927] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15788.331839] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15788.503727] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15788.675637] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15788.761739] sd 10:0:0:0: [sdc] Unhandled error code
[15788.761746] sd 10:0:0:0: [sdc]  
[15788.761748] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15788.761751] sd 10:0:0:0: [sdc] CDB:
[15788.761753] Read(10): 28 00 00 2f 5e 00 00 00 30 00
[15788.761761] end_request: I/O error, dev sdc, sector 3104256
[15788.841551] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.013464] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.185353] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.357270] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.529168] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.701068] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15789.787181] sd 10:0:0:0: [sdc] Unhandled error code
[15789.787188] sd 10:0:0:0: [sdc]  
[15789.787190] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15789.787192] sd 10:0:0:0: [sdc] CDB:
[15789.787194] Read(10): 28 00 00 2f 5e 00 00 00 08 00
[15789.787202] end_request: I/O error, dev sdc, sector 3104256
[15789.866984] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.029923] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.201809] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.373707] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.545600] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.717540] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15790.803611] sd 10:0:0:0: [sdc] Unhandled error code
[15790.803617] sd 10:0:0:0: [sdc]  
[15790.803619] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15790.803622] sd 10:0:0:0: [sdc] CDB:
[15790.803624] Read(10): 28 00 00 2f 5e 08 00 00 08 00
[15790.803631] end_request: I/O error, dev sdc, sector 3104264
[15790.883452] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.055337] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.227229] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.399163] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.571050] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.742941] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[15791.828918] sd 10:0:0:0: [sdc] Unhandled error code
[15791.828923] sd 10:0:0:0: [sdc]  
[15791.828925] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[15791.828927] sd 10:0:0:0: [sdc] CDB:
[15791.828928] Read(10): 28 00 00 2f 5e 10 00 00 20 00
[15791.828935] end_request: I/O error, dev sdc, sector 3104272
0
 
LVL 90

Accepted Solution

by:
John Hurst earned 500 total points
Comment Utility
Thanks. I use lots of flash keys. When they go bad, there isn't much you can do. I suggest you discard the key and use a new one.
0
 

Author Comment

by:Nusrat Nuriyev
Comment Utility
It's not possible to copy neither in Windows nor in Fedora.

Also when I try to check the disk using windows chkdsk it says something like "disk is protected from writing"
0
 
LVL 90

Expert Comment

by:John Hurst
Comment Utility
@Nusrat Nuriyev  - Thank you and I was happy to help.
0

Featured Post

How to run any project with ease

Manage projects of all sizes how you want. Great for personal to-do lists, project milestones, team priorities and launch plans.
- Combine task lists, docs, spreadsheets, and chat in one
- View and edit from mobile/offline
- Cut down on emails

Join & Write a Comment

Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
If you need to start windows update installation remotely or as a scheduled task you will find this very helpful.
In this video, we discuss why the need for additional vertical screen space has become more important in recent years, namely, due to the transition in the marketplace of 4x3 computer screens to 16x9 and 16x10 screens (so-called widescreen format). …
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

763 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now