Implementing Cisco QOS on Cisco 4507 and 3560 E for MS Lync 2013 voice

Dear All,

 I have a core switch 4507 connected to all my fiber location's ( Loc 1, Loc 2, loc 3, Loc 4, etc). I have Cisco 3560 in my location's.  I need to implement QOS for MY lycn 2013 voice traffic between the loc 1 and the main core switch.

can someone explain to me what commands I need to implement in my global and interfaces configuration. in my loc 1 I have 2 Vlan ( Vlan 50 for Data and Vlan 55 for Voice ).

-------------------

Cisco Iso version
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M),                                                                     on 12.2(54)SG, RELEASE SOFTWARE (fc3)

Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE5,



Thanks
LVL 1
ITMaster1979Asked:
Who is Participating?

[Webinar] Streamline your web hosting managementRegister Today

x
 
eeRootConnect With a Mentor Commented:
Has the Lync software been set to use a particular DSCP value?
http://technet.microsoft.com/en-us/library/jj205076.aspx

And do you have a network diagram showing the switches and routers in use use at the various sites?
0
All Courses

From novice to tech pro — start learning today.