Solved

Browsing to a site with ip address issue

Posted on 2014-09-07
4
239 Views
Last Modified: 2014-09-12
Hi,

I have a web site setup in my local environment which I only access on a public ip address.  In my remote AD environment I can't ping or browse to the site.  When I assign a public ip to a server in that same environment and set the dns servers to google's public dns it works without issue.

Is there a quick fix to this issue?
0
Comment
Question by:ts11
  • 3
4 Comments
 
LVL 22

Expert Comment

by:Larry Struckmeyer MVP
ID: 40309064
Hi:

Seems you have found the fix?  What do you want to do you have not already done?  From Site B you want to browse via an internet browser to Website A?  Seems you have don't this.
0
 

Author Comment

by:ts11
ID: 40309074
I don't want to waste a public ip address just to allow the server to browse one web site.

I want to browse a local site I have via it's public ip address at my remote site - this all works fine browsing it from anywhere local or from home
In my remote site I can't browse to it in the local network, unless I assign a public ip to a server in that site and set google public dns on the adapter.
0
 

Accepted Solution

by:
ts11 earned 0 total points
ID: 40309168
found the problem.  the router at the remote site was once configured to be in a site to site vpn with the router at my local site.
0
 

Author Closing Comment

by:ts11
ID: 40318884
see my last post.
0

Featured Post

Free eBook: Backup on AWS

Everything you need to know about backup and disaster recovery with AWS, for FREE!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question