• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 532
  • Last Modified:

office VPN multiple users

Hi All,
I have to setup a VPN with the Bell 2864 modem and the Cisco RV320.
They told me at Bell that their modem / router is all I need. I do believe that.
I have the other Cisco rv320 just in case. I am planning on bridging the 2864 and using the RV320 as a router / vpn. I have read that it is easy but this is the first vpn that i have had to setup.
I need to know how to do this or just a brief tutorial on how to setup the routers. The rv320 is not wireless so I will have to setup a wap router off the rv320 as well. The remote users are only going to need access to some shares on the server, Please help me out. Thanks
0
RandyTech
Asked:
RandyTech
  • 3
1 Solution
 
John HurstBusiness Consultant (Owner)Commented:
You have asked two very distinct questions that are unrelated.

I have a Cisco RV042 VPN router and a Cisco 220 Wireless router hooked up two. I have tunnels built to clients that work on the wired Windows 7 desktop or my wireless Windows 8 laptop.

1. For IPsec VPN, you need to set up the connection points, phase 1 and phase 2, the IKE policies, the pre-shared key and set the miscellaneous variables. There is a lot to VPN so you should get a start and then ask specific questions. The phases and IKE policies need to be the same at both ends and the subnets on each end must be different.

2. To hook up wireless, hook up a LAN port on the wireless router to a LAN port on the VPN router, give the wireless router a static IP address on the VPN router, and turn DHCP OFF on the wireless router. That will make it an access point on the network.
0
 
John HurstBusiness Consultant (Owner)Commented:
Also if you wish to set up remote users, you need a client to gateway connection, set up the policies on the office router and then provide a VPN client to the remote users.  I use NCP Secure Entry.
0
 
John HurstBusiness Consultant (Owner)Commented:
@RandyTech - Thank you and I was happy to help.
0

Featured Post

Get Certified for a Job in Cybersecurity

Want an exciting career in an emerging field? Earn your MS in Cybersecurity and get certified in ethical hacking or computer forensic investigation. WGU’s MSCSIA degree program was designed to meet the most recent U.S. Department of Homeland Security (DHS) and NSA guidelines.  

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now