Solved

Exclude interface from scanning by Cisco TrendMicro SSM Module

Posted on 2014-09-10
2
134 Views
Last Modified: 2014-10-16
I have a Cisco ASA 5510 with TrendMicro SSM module.
On interface two I have a Wi-Fi transmitter connected and want to exclude
that all traffic excluded to be scanned by the TrendMicro module.
0
Comment
Question by:Eprs_Admin
2 Comments
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 40317260
You need to get the IP address(s) that you want to exclude

And bypass the SSM for that/those addresses, the process is the same as this just replace the IP of the CSC with the IP you want to exclude.

Pete
0
 

Author Comment

by:Eprs_Admin
ID: 40341440
ok
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When I upgraded my ASA 8.2 to 8.3, I realized that my nonat statement was failing!   The log showed the following error:     %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows It was caused by the config upgrade, because t…
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…
Both in life and business – not all partnerships are created equal. Spend 30 short minutes with us to learn:   • Key questions to ask when considering a partnership to accelerate your business into the cloud • Pitfalls and mistakes other partners…

815 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now