• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 236
  • Last Modified:

Dell Equilogic

Hi,

What are the commands to setup the second controller on the Dell Equilogic?  The first is setup, but not sure how to get the second in place.

Thanks

Jack
0
Jack_son_
Asked:
Jack_son_
  • 3
  • 2
2 Solutions
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Connect via Web Browser ?

What model do you have ?
0
 
Jack_son_Author Commented:
PS6100; to clarify, I'm adding a second controller is the issue.  Do I just plug into the second controller and run through the setup?
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
do you already have access to the GUI ?
0
 
Jack_son_Author Commented:
yes
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
you can add and configure the controller there
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 3
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now