Have a 2012 R2 Hyper-V server with 3 virtual server.
They are on one virtual lan (one nic)
Have a web server on a physical server connected to the DMZ zone of the firewall and was planning to convert it to virtual. (disk2vhd)
Plan is to use one of the NIC's in the server and make another vLAN and connect that NIC to the DMZ zone in the firewall.
So I'll have 3 servers in one vLAN (10.0.0.0) and one webserver in a DMZ zone (10.10.0.0)
Firewall (physical) will still be in charge of the rules.
Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this video tutorial I show you the main steps to install and configure a VMware ESXi6.0 server.
The video has my comments as text on the screen and you can pause anytime when needed.
Hope this will be helpful.
Verify that your hardware and BIO…