Solved

redirected printing not working after one print job

Posted on 2014-09-12
4
121 Views
Last Modified: 2014-09-22
I'm having an issue with a 2012 server that I have users remoting into and printing back via redirected printing.  I can get one print job to print out, but then nothing.  There are no errors and the printer doesn't ever show it receives the job locally after the first one.  I have rebooted both server and PC with no resolution.  I did find when logged in as an admin I can keep printing, but normal users can't.
0
Comment
Question by:sidelogic
  • 3
4 Comments
 
LVL 27

Expert Comment

by:Steve
ID: 40322160
check the eventvwr for both server and client at initial RDP connection and when printing. there should be an error/warnings if something is going wrong.
0
 

Author Comment

by:sidelogic
ID: 40322402
That is the best part as there are no errors in the logs.  I swapped the windows 8.1 machine with a windows 7 fully updated and everything works fine.  There is something with the 8.1 system that was blocking it, but not sure what.
0
 

Accepted Solution

by:
sidelogic earned 0 total points
ID: 40329235
solution was to remove the 8.1 machine and put in a 7 and it works fine...  stupid windows.
0
 

Author Closing Comment

by:sidelogic
ID: 40336163
Found my own solution.
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Recently, I was assigned the task of performing a hardware refresh in the datacenter. The previous Windows 2008 systems were connected to the SAN via fiber channel HBA’s and among other thing, had PowerPath installed in order to provide sufficient f…
I don't know if many of you have made the great mistake of using the Cisco Thin Client model with the management software VXC. If you have then you are probably more then familiar with the incredibly clunky interface, the numerous work arounds, and …
In this Micro Tutorial viewers will learn how to use Windows Server Backup to create full image of their system. Tutorial shows how to install Windows Server Backup Feature on Windows 2012R2 and how to configure scheduled Bare Metal Recovery backup.…
In this Micro Tutorial viewers will learn how to use Boot Corrector from Paragon Rescue Kit Free to identify and fix the boot problems of Windows 7/8/2012R2 etc. As an example is used Windows 2012R2 which lost its active partition flag (often happen…

785 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question