Solved

IBGP to OSPF examples

Posted on 2014-09-13
1
283 Views
Last Modified: 2014-09-13
The network I'm working at is using IBGP and they want to move over to OSPF, I'm looking for some good examples and ideas for doing this. I'd like to lab some examples and have some documentation for a proposal that I need to submit for this.

Note: this is a large network data center type of environment using 6500 series devices.

Thank you,
0
Comment
Question by:dsterling
1 Comment
 
LVL 28

Accepted Solution

by:
Jan Springer earned 500 total points
ID: 40320954
are you using iBGP solely for the redistribution of the routes within your network?

if so, just configure the OSPF with the same networks (and optionally default route).

if you haven't changed the distance in BGP, then it will still be preferred.

you can cut over to OSPF leaving your BGP configuration intact by simply changing the distance under the 'router bgp' configuration.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Join & Write a Comment

Suggested Solutions

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now