Solved

HP switch config with errors

Posted on 2014-09-15
7
319 Views
Last Modified: 2014-09-16
Hi Experts,

I have some problems with a HP Switch.
The switch is HP 2510G-24 J9279A.

I have a lot of errors on this switch all on port 21.
See the picture.

CRC errors
Can you help me to solve this errors and can you explain what this errors mean ?
0
Comment
Question by:Eprs_Admin
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 3
7 Comments
 
LVL 46

Expert Comment

by:Craig Beck
ID: 40322745
Every HP switch I've ever worked with will show this, even when there are no issues at all.

Manually set the speed/duplex on the switch port and the device which is connected to port 21 and the errors should stop.
0
 

Author Comment

by:Eprs_Admin
ID: 40322759
the duplex is ok
Our other switches dont have it. maybe one time a month but not each day.
0
 

Author Comment

by:Eprs_Admin
ID: 40322760
is it possible to change over to a cisco switch and copy the config or migrate it ?
0
SharePoint Admin?

Enable Your Employees To Focus On The Core With Intuitive Onscreen Guidance That is With You At The Moment of Need.

 
LVL 46

Expert Comment

by:Craig Beck
ID: 40322783
Whether the duplex is ok or not - try it.  This is what usually works.

Why go to the expense of changing the switch if there's maybe a simple solution to try first?
0
 

Author Comment

by:Eprs_Admin
ID: 40322789
because CISCO is more reliable then HP.
But ok, I will test the cables and plugs and the config mode.
0
 
LVL 46

Accepted Solution

by:
Craig Beck earned 500 total points
ID: 40322948
Hmmm why do you say that? I'm certified in both - neither is specifically more reliable.

Don't worry about testing cables, etc, just set the speed/duplex and clear the logs.
0
 

Author Comment

by:Eprs_Admin
ID: 40325002
ok thanks
0

Featured Post

Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question