Solved

pix 515E newbie setup

Posted on 2014-09-15
1
180 Views
Last Modified: 2014-09-16
Hello EE,

I have a new tenant that will be patching into our network currently configured as 192.168.32.0 subnet. I will create a vlan on the switch to accommodate them say 192..168.1.0 subnet , Our pix firewall is the gateway as well 192.168.32.3 , how do I go about configuring the PIX 515E spare physical interface say as 192.168.1.1 using the 192.168.32.3 as the gateway
0
Comment
Question by:davesnb
1 Comment
 
LVL 17

Accepted Solution

by:
Spartan_1337 earned 500 total points
ID: 40323819
If you are using ASDM, then just go to Configuration then Interfaces.

From there, you just have to double click on any unused interface and configure it with the static IP:

192.168.1.1
255.255.255.0

The only question is, what is the security level you want to set this interface to? Inside interface is 100 (fully trusted) .
0

Featured Post

Find Ransomware Secrets With All-Source Analysis

Ransomware has become a major concern for organizations; its prevalence has grown due to past successes achieved by threat actors. While each ransomware variant is different, we’ve seen some common tactics and trends used among the authors of the malware.

Join & Write a Comment

If you have an ASA5510 then this sort of thing would be better handled with a CSC Module, however on an ASA5505 thats not an option, and if you want to throw in a quick solution to stop your staff going to facebook during work time, then this is the…
Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…
You have products, that come in variants and want to set different prices for them? Watch this micro tutorial that describes how to configure prices for Magento super attributes. Assigning simple products to configurable: We assigned simple products…

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now