Solved

vlan configurations

Posted on 2014-09-15
5
204 Views
Last Modified: 2014-09-16
I have a pix 515 e and an HP1810 switch . I want to create a new lan for a sub tenant in the same building. I assigned the 192.168.50.0 subnet to the new lan and created a 192.168.50.1 physical interface on the pix as a gateway, I created a vlan on the switch (vlanid 2)and assigned 6 ports to vlan id 2 ( the new lan) .  I will plug the 192.168.50.1 interface into a vlanid2 .How do set the gateway ip for the vlan network to 192.168.50.1 ?
0
Comment
Question by:davesnb
  • 3
  • 2
5 Comments
 
LVL 24

Expert Comment

by:Ken Boone
ID: 40323969
You just set the 192.168.50.1 address as the gateway for all devices that are on vlan id 2.
0
 

Author Comment

by:davesnb
ID: 40324115
In the switch web interface (do not see)?.. or on the pc interface card or a wireless router on the 192.168.50.1 subnet?
0
 
LVL 24

Expert Comment

by:Ken Boone
ID: 40324161
so the switch management interface only needs to be on one of the vlans so it does not need to have 2 default gateways configured.  The PCs that will live on the new subnet will need to have the 192.168.50.1 configured as their gateway.
0
 

Author Comment

by:davesnb
ID: 40324187
Can you explain " so the switch management interface only needs  to be on one of the vlans so it does not need to have 2 gaeways configured".. are you saying if I plug the 192.168.50.1 interface into one of the vlanid2 ports on the switch I an good to go ?
0
 
LVL 24

Accepted Solution

by:
Ken Boone earned 500 total points
ID: 40324329
Yes that is exactly what i am saying.  Just keep the switch management interface which is layer 3 on your network.  Just connect the firewall interface for 192.168.50.1 on a port with the new vlan.  Plug the tenant into those ports and let them know that their gateway is 192.168.50.1.

Thats it!
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Line cards, Supervisor, Control plane 7 37
Website Issue 10 76
Flashing red status light on a Cisco 3702i access point 7 59
switch design question 6 36
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
Data center, now-a-days, is referred as the home of all the advanced technologies. In-fact, most of the businesses are now establishing their entire organizational structure around the IT capabilities.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question