Connect a Wireless D-Link DSC-933L using a Sonicwall TZ-190 Access Point

Posted on 2014-09-18
Last Modified: 2014-10-21
I'm attempting to connect a D-Link wireless camera inside an office with a Sonicwall TZ-190 wireless router as the access point. I have tested the camera on my home network and it connects as expected. Once taken to the office I use the wireless IP addresses of the TZ-190 in the camera configuration. However, I cannot make a connection nor am I able to ping the camera's IP address. The green light on the camera seems to indicate a wireless connection to the access point with the proper IP address and WPA passphrase. Obviously I need to open a port or add a rule to allow this connection. Please help.
Question by:Generator
  • 3
  • 2
LVL 10

Expert Comment

by:Gajendra Rathod
ID: 40331849
Please create firewall rule to allow traffic from wired to wireless.

Author Comment

ID: 40331922
The wireless camera will be viewed via a users wireless connection on her laptop.
LVL 10

Expert Comment

by:Gajendra Rathod
ID: 40335131
Check both client and camera has same subnet. In wireless setting, click one advanced menu and uncheck client isolation if it selected.

Accepted Solution

Generator earned 0 total points
ID: 40385843
Solution turned out to be updating the firmware on the firewall.

Author Closing Comment

ID: 40394013
Other comments not helpful.

Featured Post

What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Working settings for French ISP Orange "Prêt à Surfer" SIM cards for data connections only. Can't be found anywhere else !
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

896 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now