Solved

Procurve switches and SonicWALL Sonicpoint

Posted on 2014-09-19
3
456 Views
Last Modified: 2014-09-24
Need help please.
I have a test system setup as follows
Sonicwall NSA2400, X0 is the LAN port on 172.31.255.254. X1 is the WAN port. X2 is set as the WLAN on 172.16.10.1 (used solely for provisioning sonicpoints). X2:V20 on 10.10.50.1 and X2:V30 on 10.10.60.1.  DHCP's are setup for all 3 VLANS.
X2 is connected to first procurve on port 1. Port 1 is tagged with VLAN 20 & VLAN 30, untagged on Default VLAN. All other ports are untagged for Default VLAN.
X0 from SonicWAll NSA is in port 3.
Port 2 on the Switch is tagged for all VLANS.
Procurve 2 has port 1 tagged for all 3 VLANS.  Port 24 is tagged for VLAN 20 and VLAN 30 and untagged for default VLAN.
Sonicpoint N is plugged into port 24.
The Sonicpoint does provision OK, my problem is that when I plug a PC into the switches I am sometimes getting an IP address in the range of the default VLAN and not from my DHCP server. My VLAN knowledge isn't brilliant nor my procurve setup, could use some help please.
Thanks
0
Comment
Question by:AndyARA
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 40

Accepted Solution

by:
noci earned 500 total points
ID: 40334291
you should create a vlan 40and use that untagged on port 3, add it tagged to the trunk and untagged again on port 24 of switch 2.

Then VLAN 0 & 40 will be separated.
0
 

Author Comment

by:AndyARA
ID: 40334317
I'll give that a go thanks
0
 

Author Closing Comment

by:AndyARA
ID: 40341047
Thanks, soon as I added that VLAN it made sense to me....couldn't see the wood for the trees till then.
0

Featured Post

Creating Instructional Tutorials  

For Any Use & On Any Platform

Contextual Guidance at the moment of need helps your employees/users adopt software o& achieve even the most complex tasks instantly. Boost knowledge retention, software adoption & employee engagement with easy solution.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
This article offers some helpful and general tips for safe browsing and online shopping. It offers simple and manageable procedures that help to ensure the safety of one's personal information and the security of any devices.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question