Solved

Two DNS at same server (same physical machine)

Posted on 2014-09-20
7
174 Views
Last Modified: 2014-09-26
Lets say I have two IP addresses on a single Small business Server SBS 2011 server.
192.168.0.2 & 192.168.0.3

I want that if the query comes on 192.168.0.2; DNS server forwards it to 208.67.222.222
and if query comes on 192.168.0.3; DNS server forwards it to 8.8.8.8. Rest remains same (resolution of local records)

Is it possible on the same DNS server or do I need any third party DNS server to be installed on the same physical machine.

If I have to install another 3rd party DNS server on same physical machine then I guess, I have to manually import all the existing DNS records from existing DNS server to newly added DNS server.

one of the 3rd party DNS:
http://dhcp-dns-server.sourceforge.net/

looking for more simple GUI DNS if required.
0
Comment
Question by:Akash Bansal
7 Comments
 
LVL 39

Expert Comment

by:footech
ID: 40334988
I'm about certain that this can't be done with only Windows DNS server (not even sure if it can be done with third party software).  Maybe if you bind one DNS service to one IP and the other to another IP.

Can't think of why you would want to though.
0
 
LVL 11

Expert Comment

by:Paul S
ID: 40334989
footech is right. I don't think windows will do this. you would need third party DNS and configure it to bind to a single IP and then configure windows DNS to bind to the other IP.
0
 
LVL 1

Author Comment

by:Akash Bansal
ID: 40334996
Answer to the query Why I do need this? Pls go through the following thread:
http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_28522323.html#a40334720

Yes, I would bind MS DNS server with one IP & another instance of DNS (may be 3rd party) to another.
WHich 3rd party DNS would accomplish this in most easily & stable way?
0
Threat Intelligence Starter Resources

Integrating threat intelligence can be challenging, and not all companies are ready. These resources can help you build awareness and prepare for defense.

 
LVL 21

Expert Comment

by:Larry Struckmeyer MVP
ID: 40335164
Using active directory and a quality router/firewall you can accomplish this AND increase the security of your network.  Since we don't know what your geo is hard to recommend a particular piece of kit.
0
 
LVL 1

Author Comment

by:Akash Bansal
ID: 40335369
Managed to setup additional DNS server on the second IP address using
http://dhcp-dns-server.sourceforge.net/

The client computer is getting correct IP of all the hosts .


Except:

_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.myname.local
_ldap._tcp.myname.local
_ldap._tcp.Default-First-Site-Name._sites.myname.local

 is not found, thats why having issue while connecting the AD & Exchange.

getting error in DNS log files that this does not found in forwarding server.



I guess this must not be forwarded to the forwarding server but must resolved locally.

Please guide.
0
 
LVL 1

Accepted Solution

by:
Akash Bansal earned 0 total points
ID: 40335534
The issue got resolved using another thread at Expert Exchange.
Thanks guys for putting your efforts in resolving the issue.

http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_28522323.html
0
 
LVL 1

Author Closing Comment

by:Akash Bansal
ID: 40345624
The issue got resolved using another thread at Expert Exchange.


http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_28522323.html
0

Featured Post

What Is Threat Intelligence?

Threat intelligence is often discussed, but rarely understood. Starting with a precise definition, along with clear business goals, is essential.

Join & Write a Comment

Enterprise networks where VoIP phones have been deployed frequently use port configurations that allow both a computer and an IP phone to be plugged into the same switch port but use different VLANs. On Cisco equipment I'm referring to the "native V…
Resolve DNS query failed errors for Exchange
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.
This video shows how to remove a single email address from the Outlook 2010 Auto Suggestion memory. NOTE: For Outlook 2016 and 2013 perform the exact same steps. Open a new email: Click the New email button in Outlook. Start typing the address: …

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now