I have a Proliant DL360 G6 with both a P410i smart array controller (with hdds attached) and a P212/256 smart array controller (with a HP MSL2024 Tape library attached)
Since upgrading to firmware version 6.60 I have noticed significant through put reduction on the P212 with the tape library.
I am wanting to downgrade the firmware on the P212 to see if the update was the problem.
I have the previous firmware exe install file (v6.40b) but when I run it, it is going to automatically downgrade both controllers.
Is it possible (with a command line switch?) to select which controller to downgrade?