Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 208
  • Last Modified:

Equallogic PS300

I have a question on this array configuration and reboot.
I noticed this in a client place that all the cable on first CM is connected to switches and only one cable fro the second CM is connected to switch.
1 Is this configuration is correct?
2. What will happen if i reboot one array in the pool? will the servers disconnect from LUN?
0
sara2000
Asked:
sara2000
1 Solution
 
kevinhsiehCommented:
It's okay, but not ideal. Some of the Equallogic controllers actually let all of the cables be attached to one controller and either controller can use those connections. It is generally better to have all of the ports on both controllers cabled. You can run the array with just a single Ethernet port connected to a controller.

Whether or not your servers can gracefully handle a controller reboot depends on whether or not the various timeouts are configured properly on your servers, and to some extent what the load and firmware revision is on the array member.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now