Solved

Access External FTP site from inside domain network blocked

Posted on 2014-10-01
4
175 Views
Last Modified: 2014-11-19
Hello all,

We recently were given an FTP that we want to access from within our network.  If we are outside our domain or on our guest network the FTP works fine however when inside our domain we get "No connection could be made because the target machine actively refused it.
Connection failed."

I ran a WireShark and see the attached file.

I checked GPO, Anti-virus and our web filter but none of those seem to be the issue.  Is there something I am missing here?
Untitled.png
0
Comment
Question by:PDGPA
  • 2
4 Comments
 
LVL 1

Expert Comment

by:GraceHelpdesk
ID: 40354766
Check your Windows firewall rules as well.  The rule could be enabled for the public profile but not the domain profile.
0
 
LVL 27

Expert Comment

by:Dan McFadden
ID: 40354781
1. Is this FTP server on your network?
2. Do you have a firewall device/appliance that is blocking access to port 20 & 21?
3. can you ping the FTP server from any network?
4. are you using a proxy server?

Dan
0
 

Accepted Solution

by:
PDGPA earned 0 total points
ID: 40443688
Our Cisco Scansafe had an issue, thanks all
0
 

Author Closing Comment

by:PDGPA
ID: 40451923
yes
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question