Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

How to ensure the Cisco UC560 uses only the Codec G.711 on all SIP trunkl phone calls

Posted on 2014-10-04
3
Medium Priority
?
189 Views
Last Modified: 2014-11-14
When calls are made using the SIP trunks the SIP invite from the Cisco UC agrees on the G7.11 codec, but when the RTP stream starts the call fails because G7.29 is being used.

How do i make sure the Cisco will only use the G7.11 codec all the way through the call?
0
Comment
Question by:MorganGunter
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 31

Expert Comment

by:Predrag
ID: 40361448
0
 

Accepted Solution

by:
MorganGunter earned 0 total points
ID: 40391025
That did not resolve the issue. Turned out to be with the Carrier so customer terminated contract with Carrier and installed a new PRI service.
0
 

Author Closing Comment

by:MorganGunter
ID: 40442253
The problem was no longer an issue as the customer canceled the sip trunks
0

Featured Post

Enhanced Intelligibility Without Cable Clutter

Challenge: The ESA office in Brussels wanted a reliable audio conference system for video conferences. Their requirement - No participant must be left out from the conference and the audio quality must not be compromised.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In my office we had 10 Cisco 7940G IP phones that were useless as they were showing PROTOCOL APPLICATION INVALID when started. I searched through Google and worked for a week continuously on those phones, and finally got them working. This is a di…
Every year the snow affects people and businesses. According to the Federation of Small Businesses (FSB), in 2009, UK businesses lost an estimated £1.2bn (http://news.bbc.co.uk/1/hi/business/7864804.stm) because of bad weather. This article was c…
Visualize your data even better in Access queries. Given a date and a value, this lesson shows how to compare that value with the previous value, calculate the difference, and display a circle if the value is the same, an up triangle if it increased…
Have you created a query with information for a calendar? ... and then, abra-cadabra, the calendar is done?! I am going to show you how to make that happen. Visualize your data!  ... really see it To use the code to create a calendar from a q…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question