Solved

cert question in Cisco

Posted on 2014-10-05
2
240 Views
Last Modified: 2014-10-16
You are working at an ISP that has two upstream 10Gbps connections to two different providers. BGP is used to propagate the routes for each connection. The ISP has around 16,000 IP addresses over a multiple /19 and /20 prefixes, all announced from your own AS. Your total bandwidth needs to top out at 13Gbps but the requirement is to evenly balance the incoming and outgoing traffic over the two links.
a)      How would you balance the incoming and outgoing traffic evenly, or as evenly as possible, over the two connections?
0
Comment
Question by:c_hockland
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 82

Accepted Solution

by:
David Johnson, CD, MVP earned 500 total points
ID: 40363005
What ideas do you have to traffic balance these 2 connections..
0
 

Author Closing Comment

by:c_hockland
ID: 40384240
i had no ideas thats why i asked.
0

Featured Post

Moving data to the cloud? Find out if you’re ready

Before moving to the cloud, it is important to carefully define your db needs, plan for the migration & understand prod. environment. This wp explains how to define what you need from a cloud provider, plan for the migration & what putting a cloud solution into practice entails.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question