Solved

When connected to a Sonicwall via VPN, cannot hit devices connected to a second Sonicwall (Site to Site)

Posted on 2014-10-07
1
196 Views
Last Modified: 2014-12-23
SITE A:

Sonicwall TZ-215
Public WAN IP: 123.X.X.X
LAN IP: 10.30.0.0 / 255.255.255.0

This device is configured to allow VPN connections via L2TP. It places VPN connected machines on the 10.30.2.0 network.

SITE B:

Sonicwall TZ-215
Public WAN IP: 456.X.X.X
LAN IP: 10.30.1.0 / 255.255.255.0


Site A can hit Site B, but devices connected to Site A's L2TP VPN can hit devices on all of Site A's subnets but cannot hit Site B.

Site B can hit Site A but cannot hit devices on the L2TP VPN.

Any insight or places to look would be great. I've played with the access rules left and right on both firewalls but am just not having any luck!
0
Comment
Question by:aocconnectadmin
1 Comment
 
LVL 2

Accepted Solution

by:
Axis52401 earned 500 total points
ID: 40367223
Take a look at this other EE post. Sonicwall VPNs are very picky about having each end configured the same.

http://www.experts-exchange.com/Hardware/Networking_Hardware/Firewalls/Q_28283606.html
0

Featured Post

Do You Know the 4 Main Threat Actor Types?

Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

Join & Write a Comment

Suggested Solutions

Title # Comments Views Activity
Cisco MRA Phones 4 26
jump server vs push server 6 98
Purpose of Azure Gateway Subnet when creating a VPN 3 35
sync conflicts 1 27
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

746 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now