Solved

Server's space

Posted on 2014-10-12
2
135 Views
Last Modified: 2014-10-24
We have few physical and lot of VMs in our network.
I am trying to find physical servers space, that is, C: and D: drives space.
IS there any easy way to find them?
I know how to get VMs via powercli.
I AM ONLY INTERESTED ON physical servers.
0
Comment
Question by:sara2000
2 Comments
 
LVL 88

Expert Comment

by:rindi
ID: 40376056
If you are using VMware ESXi, you should be able to see the space with vCenter. If your host is Hyper-V, and you are using a GUI version of Hyper-V, open Diskmanagement on the host, and you'll see what you have and what is used there.
0
 
LVL 15

Accepted Solution

by:
ZabagaR earned 500 total points
ID: 40376160
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Patch Management is administrated by page 129 of  the following document:     http://support.dell.com/support/edocs/software/smdmc/11/en/ug/ug.pdf However, there are issues with Patch Management with FTP (for instance, a slow Internet connectio…
INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question