Solved

added webserver, network outages

Posted on 2014-10-14
3
64 Views
Last Modified: 2015-03-03
I recently added a webserver to a very small network that has some oddities.  The network map is Cable Modem (WAN) to netgear switch, two static IP addresses split to two separate routers (2 businesses).  The one I have control over is a sonicwall TZ 105.  The webserver is on the DMZ of the sonicwall in a seperate subnet.

They tell me that this very odd set up worked fine before the webserver was installed.

I'm not much of a networking guy, is there something I can do with the sonicwall to take care of some of the network outages?
0
Comment
Question by:gwarcher
  • 2
3 Comments
 
LVL 18

Expert Comment

by:Akinsd
ID: 40380552
A more detailed information may be needed to avoid a wild goose chase.
Please consider an actual topology sketch including type of connections. If you have access to the router, some routing information may be beneficial.
If the webserver is causing outages, more info on where and how the server is setup including DNS entries etc
0
 

Accepted Solution

by:
gwarcher earned 0 total points
ID: 40633677
sorry this is abandoned.  the fix was a simple access point closer to the wireless devices.
0
 

Author Closing Comment

by:gwarcher
ID: 40641355
figured it out awhile ago.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
MPLS VRF bridging 4 65
OSPF Question 12 63
Booster, Repeater, or Wireless Access Point 9 52
How to route a specific IP address to a specific port on a Fortinet 90D 2 33
SSL is a very common protocol used these days when browsing the web.  The purpose is to provide security to communication, but how does it do it?  There are several pieces at work that have to be setup before SSL will even work and it requires both …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question