Solved

Server 2008 R2 Failover Cluster with 2 Domain Controllers

Posted on 2014-10-14
1
112 Views
Last Modified: 2014-11-03
Having an issues setting up a cluster between 2 Domain controllers. I am only using this for a file share cluster as this is where our SAN is connected to both domain controllers. I am unable to run a validate against the other DC from either site.

Any ideas or pointers?
0
Comment
Question by:AFRITSupport
1 Comment
 
LVL 57

Accepted Solution

by:
Cliff Galiher earned 500 total points
ID: 40380597
Don't make DCs cluster nodes. It is almost impossible to get working on 2008 (and R2) and officially became unsupported with 2012. Very bad things happen.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
OfficeMate Freezes on login or does not load after login credentials are input.
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question